If you’re thinking about buying a pair of Hunter boots, take a look at our how do hunter boots stretch advice below.
Hunter boots aren’t available in half sizes. You’ll need to size up and wear thick socks if you normally wear a half size. But there’s more to these boots’ sizing than just the foot length, which we go through in depth.
Regardless of why you’re looking for boots, you’ll need ones that fit—and fit well.
Hunter boots, on the other hand, can be tough to size because they aren’t only about length and width. If you’re wearing long boots, your leg gets caught in the mix as well.
Finding a boot that fits your calves may appear to be a difficult challenge, so let’s take a closer look.
How to Hunter Boots Stretch – 6 Tips
Rubber boot stretching is a simple task that can be accomplished in a variety of ways.
Each tip is unique and employs several “expansion mechanics.” Examine each suggestion and put what works for you into practice!
We’ve compiled a list of the top 6 rubber boot stretching methods for you, which are shown below.
1. Try Ice Stretching
Stretching your rubber boots with ice is a simple process that involves only a few common household goods, such as water, plastic Ziploc bags, and a freezer (for the ice).
Although ice stretching isn’t a well-known technique, we encourage giving it a try.
It operates by utilizing little ice cubes. It’s also simple to implement (more so than traditional methods).
To begin the stretching process, follow the simple procedures outlined below.
- Fill two Ziploc bags with water, about a third of the way full.
- Make a small hole in the seal of the sealable bags to allow air to escape.
- Place the water bags in each of the shoes so that the water comes into contact with the boot’s inner layer.
- Place the bag’s face (open hole) against the stretchable area of the boots.
- You must now place your rubber boots in the freezer for the entire night before removing them the next morning. OR Place them in a safe place for a while. Allow the ice to melt gradually.
- Check the difference the next morning when you take the frozen boot bags out of the freezer. Its volume rises as it melts, so expand your boots!
Note: You can keep repeating this step till you’re happy with the size.
Using ice to stretch rubber boots only results in a minor change in boot size, and it is often used for small and medium-size alterations.
2. Try a Shoe Stretching Liquid
Perhaps the concept of utilizing ice cubes is too time demanding for you. If that’s the case, you can just get a retail stretching liquid!
Yes, there are liquids specifically designed to stretch your rubber boots to the size you want, and they’re called ‘Shoe stretching liquids.’
You can either buy a ready-made stretching liquid or make your own by mixing 50/50 water and alcohol.
That’s another product that few people talk about. Its chemistry, on the other hand, is simple to comprehend.
- To expand your shoes using liquids, follow these steps:
- To begin, spread out some papers or torn clothing to create a working surface that will catch drips and spills.
- Don’t use the entire bottle at once; instead, use a small bit and apply it to a small area of the boots that receives less attention.
- Apply the stretching liquid and wait a few minutes before moving on.
- Apply the liquid to your desired region if it works.
- Wear a pair of thick shoes to increase the space, then flex your feet to make the gap bigger.
- For improved stretching, take a walk in your wet shoes.
Rubber and suede are softened by the liquids in rubber boots. They do so without retaliating or cracking them. And because they’ve been softened, they’ve become more flexible, allowing them to stretch while in use!
It’s a useful tool, particularly during wet seasons. If you don’t want chemicals in your boots, though, you can…
3. A Hairdryer will stretch your boots
Yes, you read that correctly; a hairdryer may be used to extend your rubber boots. It’s a great way to stretch the rubber boots to the size you want.
To use the trick, follow the instructions outlined below.
- To begin, put on a pair of thick socks, followed by rubber boots for better stretching and protection.
- Turn on the hair dryer and direct it at the sections of the boots that need to be stretched for 20-30 seconds.
- Then go for a short walk to allow the boots to cool down and continue flexing your foot for improved stretching.
- To avoid burning the boots, keep the hairdryer around 10-15 cm away from them.
Keep in mind that using a hairdryer might cause serious damage to your boots since they can melt at high temperatures.
4. Get a Rain Boot Stretcher
They are compatible with all types of boots. There’s no reason to be concerned about chemicals or “particular models.”
It starts out as a stick with a stretcher attached to the end. It can be inserted into any region of the boot’s leg and then stretched. You can stretch your ankles, calves, and even your toes this way!
However, excessive usage of a stretcher can cause your boot to rip apart. Instead, you might try…
5. Get your boots stretched by an expert
If you are unable to stretch your rubber boots to the desired size using the aforementioned household tactics, it is a great decision to have your boots stretched by a professional cobbler.
An professional cobbler can not only tell you if your boots can be stretched or if you should get new ones, but he can also stretch your tight rubber boots to fit your size using his workshop tools.
Depending on the sort of repair necessary, the cost of having your boots extended by a professional might range from $20 to over $100.
6. Hot Materials
It’s the polar opposite of using ice cubes. However, it is focused on a very distinct consequence.
To expand a boot, ice cubes rely on pressure from molten ice. Furthermore, using a hot substance softens the rubber of the boot, making it stretchy for wear.
However, keep in mind that this method is dangerous. For starters, you can’t extend the boots with boiling hot water. Plus, this is something you do inside and frequently, so it’s not pleasant!
Measuring your size for hunter boots
Hunter boots are said to fit true to size and width by consumers, so you don’t have to worry about that.
However, there is one drawback to its sizing, which necessitates a flawless fit: Hunter boots do not stretch.
There isn’t much wriggle room when it comes to thick, rubbery boots. You’ll need to know your size down to the millimeter.
Your feet should not be squeezed into clunky black Hunter boots. You’ll be in excruciating pain for days!
How to measure your feet
- Make a line through the middle of the page.
- Place one side of the page against the wall on a level, hard surface.
- Step onto the line and draw a line from your longest toe to the end of the line.
- Make a mark on either side of your feet’s widest section.
- Rep with the opposite foot.
- Make a note of the measurements for your largest foot and use them.
- Hunter footwear also caters to children, so if you need help measuring their feet, here’s a kids’ shoe sizing chart.
Hunter boots are great for measuring shoes exactly. The producers make every attempt to accommodate everyone, regardless of whether their calves are wider or narrower.
Pay attention to the sizing when purchasing a pair of Hunter boots. Measure your feet and calves multiple times and compare them to sizing charts to ensure accuracy.
Do any of your friends want to get a pair of Hunter boots? Send it along to them, and let us know what you think in the comments. See more useful article at my website newjordan2019shoes.com.